GO TO INFO FOR: Runners | Race Organisers | Measurers | Site Map    

RETURN TO COURSE LIST SELECT MAP or use browser back button to see last list selected

COURSE DETAILS for North course no: 13/009

Course Name Inskip Half Marathon 
Race Name Inskip Half Marathon 
Distance 13.109375 miles 
Measured By Paul Walsh, Grade: 2 
Measured On 11 Jan 2013 
Race Type road 
Terrain It is undulating and the race uses country roads and a short section of footpath.  
Surface Country roads and a short section of footpath. 
Configuration Single lap and follows a circular counter clockwise route. 
Section of Road On most roads, the runners will be restricted to the left hand side of the carriageway up to the centre line. Where the route follows narrow country lanes, the full width of the road will be available except as and when instructed by race marshals. The ra 
Right Turns Where road junctions are to be crossed, race marshals will filter runners these points are located on the race map. 
Comments  
Grid Ref of Start OS GRID REF: SD459368
View in Streetmap: 345900436800
File Reference  

Race Director: To renew this certificate for a new race date go to the renewal page.

Certificates of Course Accuracy have been issued for the following races using the above course:
Course Name = Inskip Half Marathon

Race (with web
site link if supplied )

County Organiser
(race director)
Organisation Certificate
Issued on
Date of
race
Inskip Half Marathon Lancs Alan Taylor Alan Taylor  16 Jan 2013  20 Jan 2013 

Course Measurement Report

A report of this course measurement will have been sent by the measurer to the first race director shortly after the measurement date. This should be consulted to check the exact details of the certified course whenever the course is used . It is suggested that runners and officials requiring these details approach the race director in the first instance. A copy of this report has also been filed by the Course Measurement Secretary, and can be scanned and sent to runners, officials, or race directors on request .

Please report to measurement secretaryany problems with using this webpage.