return to map of measurers

Measurer's contact details (for measurer ID NO=160)

Grade 1. Qualified to measure all events including National Championships.

Measurement Area:
Worcestershire, Herefordshire, N Glos & S Warwickshire

The most recent courses measured by Colin Tether in the Midlands are:

certno course_name distance datemeasured
2021218  Worcester Festival Run 5km  5km  2021-07-28 
2021081  Cheltenham Running Festival Half  Half Marathon  2021-05-05 
2021080  Cheltenham Running Festival 10km  10km  2021-05-05 
2021079  Cheltenham Running Festival 5km  5km  2021-05-05 
2020153  Hereford Couriers 5K  5k  2020-01-23 
2020065  Bourton Hilly 10K  10km  2020-02-12 
2020064  Bourton Hilly Half  21.0975km  2020-02-12 
2020033  Hereford Couriers 5K Series  10km  2020-01-23 
2019582  Bushley Mile  1 Mile  2019-11-20 
2019566  Nash Boraston 10K Dash 2019 route  10K  2019-11-13 
2019546  Guy Fawkes 5 - Alternative  5 miles  2019-10-30 
2019386  Dymock 10k  10k  2019-07-16 
2019171  Hereford 5k  5km  2019-03-26 
2019170  Hereford 10k  10k  2019-03-26 
2019169  Hereford Half Marathon  13.1 miles  2019-03-26 
2019168  Hereford Marathon  26.2 miles  2019-03-26 
2019101  Gloucester 20  20 miles  2019-02-20 
2019069  Bourton Hilly Half  13.1 miles  2019-02-03 
2019068  Bourton Hilly 10k  10k  2019-02-03 
2018576  Evesham Town 10k 2019  10k  2018-11-20 

Next Last

Records 1 to 20 of 143


  1. Select a safe course and measure it as accurately as you can. (Use an OS 1:25000 map, a bike, a GPS, or, worst, a car)
  2. Prepare a course map
  3. Notify the police and follow any safety recommendations
  4. Only after 1, 2 &3 are you ready to contact an accredited measurer and make an appointment for an accurate measurement. The measurer will make a charge (see guidelines) and you should ask for an estimate.
  5. Supply the measurer with the following:
  6. On the agreed day meet the measurer and show him the course. It is usually best to accompany him on a bike. But a car may also be suitable. On busy roads the measurer may need someone behind him to 'protect' him from the traffic as he concentrates on an accurate measurement. Busy courses may need to be measured at a quiet time, e.g. early on Sunday morning. You may find it worthwhile to consult the Safety Code for Course Measurement so that you have an appreciation of the procedures the course measurer uses to make the measurement safe. The course measurer will seek your help to ensure his safety while riding, and he might not be able to complete the measurement at a single visit if he discovers hazrds which he has not planned for.
  7. After the measurement the measurer writes a report and sends copies to the race organiser and to the area measurement secretary, who issues the Certificate of Course Accuracy. Without a valid certificate or a renewal for subsequent races, any permit issued for a race advertising a specific distance would be invalid.