return to map of measurers

Measurer's contact details (for measurer ID NO=279)

Grade 2. Qualified to measure all events except National Championships.

Measurement Area:
Berks, Hants, Wiltshire and Surrey
Measures for both ARC & UKA races

The most recent courses measured by Ian Blagg in the South are:

certno course_name distance datemeasured
2017082  Wallingford 5k no Thames Mead  5km  2017-02-26 
2017081  Wallingford 10k - no Thames Mead  10km  2017-02-26 
2016465  Reading Half Marathon  21.0975km  2016-11-13 
2016448  Tadley Reverse Ten  10 miles  2016-10-30 
2016187  Royal Berks 10k  10km  2016-05-12 
2016137  Wallingford 5k - no pub car park  5k  2016-03-13 
2016136  Wallingford 10k - no pub car park  10k  2016-03-13 
2016059  Woodley 10km  10km  2016-02-21 
2016054  Dorney Lake half marathon  21.0975km  2016-02-15 
2015501  Hook 10.028km  10.028km  2015-11-22 
2015500  Hook 10 mile  10 miles  2015-11-22 
2015283  Marlow 7  7.0155 miles  2015-06-17 
2015282  Marlow Half Marathon   21.0975km  2015-06-17 
2015231  Wargrave 10k  10 km  2015-05-20 
2015205  Royal Berks 10k  10km  2015-05-15 
2015085  Wallingford Thames Run 10k  10k  2015-02-14 
2015084  Wallingford Thames Run 5k  5k  2015-02-15 
2015042  MK 20 Mile  20 Miles  2015-02-01 
2015041  MK Half  21.0975  2015-02-01 
2014440  Reading Half Marathon  21.0975  2014-11-28 

Records 1 to 20 of 20

TO OBTAIN A CERTIFICATE OF COURSE ACCURACY:

  1. Select a safe course and measure it as accurately as you can. (Use an OS 1:25000 map, a bike, a GPS, or, worst, a car)
  2. Prepare a course map
  3. Notify the police and follow any safety recommendations
  4. Only after 1, 2 &3 are you ready to contact an accredited measurer and make an appointment for an accurate measurement. The measurer will make a charge (see guidelines) and you should ask for an estimate.
  5. Supply the measurer with the following:
  6. On the agreed day meet the measurer and show him the course. It is usually best to accompany him on a bike. But a car may also be suitable. On busy roads the measurer may need someone behind him to 'protect' him from the traffic as he concentrates on an accurate measurement. Busy courses may need to be measured at a quiet time, e.g. early on Sunday morning. You may find it worthwhile to consult the Safety Code for Course Measurement so that you have an appreciation of the procedures the course measurer uses to make the measurement safe. The course measurer will seek your help to ensure his safety while riding, and he might not be able to complete the measurement at a single visit if he discovers hazrds which he has not planned for.
  7. After the measurement the measurer writes a report and sends copies to the race organiser and to the area measurement secretary, who issues the Certificate of Course Accuracy. Without a valid certificate or a renewal for subsequent races, any permit issued for a race advertising a specific distance would be invalid.