return to map of measurers

Measurer's contact details (for measurer ID NO=21)

Grade 2. Qualified to measure all events except National Championships.

Measurement Area:
Kent, Surrey & Sussex

The most recent courses measured by Rob Bright in the South are:

certno course_name distance datemeasured
2013215  Romney Marsh 10k  10 km  2013-06-07 
2013124  Paddock Wood Half Marathon  13m 192.5y  2013-02-10 
2013123  Whitstable 10k  10 km  2013-04-01 
2012381  Folkestone 10k  10 km  2012-01-23 
2012334  Maidstone Half Marathon  13m 193y  2012-09-08 
2012200  Staplehurst 5 mile - 2012  5 miles  2012-05-16 
2012198  Staplehurst 10k  10 km  2012-04-09 
2012179  Gravesend Cyclopark 10k  10 km  2012-03-02 
2012178  Cyclopark Marathon  26m 385y  2012-03-02 
2012146  Hastings Half Marathon  13m 193y  2011-07-13 
2012144  East Malling 10k  10 km  2012-04-13 
2012132  Herne Bay 10k  10 km  2012-03-02 
2012056  Samphire Hoe 5km  5 km  2011-12-16 
2012055  Wittersham 5 Miles  5 miles  2009-11-28 
2012054  Lydd Half Marathon  13m 193y  2012-01-23 
2012044  Sidcup 10  10 miles  2011-12-13 
2012035  Canterbury 10  10 miles  2011-11-22 
2011183  Whitstable Park Run 5k  5 km  2011-07-03 
2011044  Tunbridge Wells 10k  10 km  2010-08-08 
2011033  Sittingbourne 10k  10 km  2010-10-03 

First Previous Next Last

Records 101 to 120 of 160

TO OBTAIN A CERTIFICATE OF COURSE ACCURACY:

  1. Select a safe course and measure it as accurately as you can. (Use an OS 1:25000 map, a bike, a GPS, or, worst, a car)
  2. Prepare a course map
  3. Notify the police and follow any safety recommendations
  4. Only after 1, 2 &3 are you ready to contact an accredited measurer and make an appointment for an accurate measurement. The measurer will make a charge (see guidelines) and you should ask for an estimate.
  5. Supply the measurer with the following:
  6. On the agreed day meet the measurer and show him the course. It is usually best to accompany him on a bike. But a car may also be suitable. On busy roads the measurer may need someone behind him to 'protect' him from the traffic as he concentrates on an accurate measurement. Busy courses may need to be measured at a quiet time, e.g. early on Sunday morning. You may find it worthwhile to consult the Safety Code for Course Measurement so that you have an appreciation of the procedures the course measurer uses to make the measurement safe. The course measurer will seek your help to ensure his safety while riding, and he might not be able to complete the measurement at a single visit if he discovers hazrds which he has not planned for.
  7. After the measurement the measurer writes a report and sends copies to the race organiser and to the area measurement secretary, who issues the Certificate of Course Accuracy. Without a valid certificate or a renewal for subsequent races, any permit issued for a race advertising a specific distance would be invalid.