return to map of measurers

Measurer's contact details (for measurer ID NO=12)

Grade 1. Qualified to measure all events including National Championships.

Measurement Area:
Within M25 and on rail routes out of London

The most recent courses measured by Hugh Jones in the South are:

certno course_name distance datemeasured
2003125  Flora Light Womens Challenge  5000 m  2003-09-04 
2003112  Active Amps 10k  10 km  2003-07-18 
2003111  Active Amps 5k  5 km  2003-07-18 
2003110  Active Amps 3k  3 km  2003-07-18 
2003104  Regents Park 10k Series  10 km  2003-08-07 
2003102  Battersea Park 3.5 miles  5637 metres  2003-07-10 
2003101  Battersea Park 3.5 miles  5637 metres  2003-07-09 
2003099  Dysart Dash 10k - Ham  10 km  2003-06-29 
2003095  Serpentine Summer 10k  10 km  2003-08-07 
2003090  Perivale 5  5 miles  2003-08-12 
2003088  Nike London 10k - Richmond Pk  10 km  2003-07-31 
2003082  Belgrave 5km- Battersea Park  5 km  2003-06-10 
2003081  British Open 10k  10 km  2003-04-20 
2003061  Dulwich Park 5k  5 km  2003-05-08 
2003022  Hyde Park Relays- Women  4028 m  2003-02-13 
2003021  Hyde Park Relays - Men  5422 m  2003-02-13 
2003019  London Marathon  26m 385y  2003-02-02 
2003017  Milton Keynes 16 mile  16 miles  2003-01-19 
2003016  Milton Keynes 8 mile  8 miles  2003-01-19 
2003010  Feetbeat Run in the Park  10 km  2003-01-21 

First Previous

Records 461 to 478 of 478

TO OBTAIN A CERTIFICATE OF COURSE ACCURACY:

  1. Select a safe course and measure it as accurately as you can. (Use an OS 1:25000 map, a bike, a GPS, or, worst, a car)
  2. Prepare a course map
  3. Notify the police and follow any safety recommendations
  4. Only after 1, 2 &3 are you ready to contact an accredited measurer and make an appointment for an accurate measurement. The measurer will make a charge (see guidelines) and you should ask for an estimate.
  5. Supply the measurer with the following:
  6. On the agreed day meet the measurer and show him the course. It is usually best to accompany him on a bike. But a car may also be suitable. On busy roads the measurer may need someone behind him to 'protect' him from the traffic as he concentrates on an accurate measurement. Busy courses may need to be measured at a quiet time, e.g. early on Sunday morning. You may find it worthwhile to consult the Safety Code for Course Measurement so that you have an appreciation of the procedures the course measurer uses to make the measurement safe. The course measurer will seek your help to ensure his safety while riding, and he might not be able to complete the measurement at a single visit if he discovers hazrds which he has not planned for.
  7. After the measurement the measurer writes a report and sends copies to the race organiser and to the area measurement secretary, who issues the Certificate of Course Accuracy. Without a valid certificate or a renewal for subsequent races, any permit issued for a race advertising a specific distance would be invalid.