return to map of measurers

Measurer's contact details (for measurer ID NO=149)

Grade 2. Qualified to measure all events except National Championships.

Measurement Area:
Leicestershire, parts of Notts, Staffs & Derbyshire

The most recent courses measured by Dave Mann in the Midlands are:

certno course_name distance datemeasured
2017250  Newstead Abbey Dash  5k  2017-05-26 
2017234  Holme Pierrepont GP Embank. 5k  5k  2017-05-22 
2017233  Wollaton Park 10k Run  10k  2017-05-25 
2017142  Leicester Big 10k  10k  2017-04-04 
2017117  West End 8  8 miles  2017-03-14 
2017093  Hungarton 7  7 miles  2017-03-14 
2017089  Loughborough Half Marathon  13.1 miles  2017-03-08 
2017084  Desford 5 Miles  5 miles  2017-03-01 
2017068  Ed Prickett Relay  2 miles 645 yds  2017-02-15 
2017045  Leicester Town and Grown 10k  10k  2017-02-07 
2016475  Ed Prickett Relay  2.02 Miles  2016-12-06 
2016286  Sherwood Pines 10k  10k  2016-06-24 
2016241  Road2Recovery Half Marathon  13.1 miles  2016-06-01 
2016151  Burton 10  10 miles  2016-04-22 
2016076  Gaddesby 7  7 miles  2016-03-01 
2016061  Ashby 20  20 miles  2016-02-23 
2016043  Stilton 7  7 miles  2016-02-15 
2016001  Worthington 5  5 miles  2015-12-31 
2015481  Loughborough 10k  10k  2015-11-13 
2015460  Nottingham Dirty Dash 10k  10k  2015-10-22 

First Previous Next Last

Records 21 to 40 of 92


  1. Select a safe course and measure it as accurately as you can. (Use an OS 1:25000 map, a bike, a GPS, or, worst, a car)
  2. Prepare a course map
  3. Notify the police and follow any safety recommendations
  4. Only after 1, 2 &3 are you ready to contact an accredited measurer and make an appointment for an accurate measurement. The measurer will make a charge (see guidelines) and you should ask for an estimate.
  5. Supply the measurer with the following:
  6. On the agreed day meet the measurer and show him the course. It is usually best to accompany him on a bike. But a car may also be suitable. On busy roads the measurer may need someone behind him to 'protect' him from the traffic as he concentrates on an accurate measurement. Busy courses may need to be measured at a quiet time, e.g. early on Sunday morning. You may find it worthwhile to consult the Safety Code for Course Measurement so that you have an appreciation of the procedures the course measurer uses to make the measurement safe. The course measurer will seek your help to ensure his safety while riding, and he might not be able to complete the measurement at a single visit if he discovers hazrds which he has not planned for.
  7. After the measurement the measurer writes a report and sends copies to the race organiser and to the area measurement secretary, who issues the Certificate of Course Accuracy. Without a valid certificate or a renewal for subsequent races, any permit issued for a race advertising a specific distance would be invalid.