return to map of measurers

Measurer's contact details (for measurer ID NO=122)

Grade 1. Qualified to measure all events including National Championships.

Measurement Area:
North
Measures for both ARC & UKA races

The most recent courses measured by Ken Kaiser in the North are:

certno course_name distance datemeasured
2022107  Vale of York 10K  10 km  2022-03-14 
2022106  Hull Half Marathon  13.109 miles  2022-03-10 
2022105  Hull 10K  10 Km  2022-03-10 
2022056  Chase the Sun Roundhay 2.5K lap  5K 10K  2022-02-15 
2022055  Chase the Sun Roundhay 2.5K lap  5K 10K  2022-02-15 
2022054    5K 10K  2022-02-15 
2022018  Wakefield Hospice 10K  10 Km  2022-01-19 
2022017  Sheffield Half Marathon  13.109 miles  2022-01-17 
2021341  Tadcaster 10  10 miles  2021-10-27 
2021331  Roundhay Park Half marathon  13.109 miles  2021-09-28 
2021330  Roundhay Park 5K  5Km  2021-09-28 
2021316  Middlesbrough 10K  10 km  2021-09-16 
2021260  Abbey Dash  10 Km  2021-08-19 
2021246  Vale of York Half marathon  13.1094 miles  2021-08-13 
2021195  Leeds Run Fest Half marathon  13.109 miles  2021-07-15 
2021194  Roundhay 5K loop  5K 10K  2021-07-15 
2021169  Leeds 10K  10 Km  2021-06-24 
2021168  Leeds Half Marathon  13.109 miles  2021-06-24 
2021153  Sheffield Half Marathon  13.109 miles  2021-06-11 
2021117  York 10K  10 Km  2021-06-02 

First Previous Next Last

Records 21 to 40 of 124

TO OBTAIN A CERTIFICATE OF COURSE ACCURACY:

  1. Select a safe course and measure it as accurately as you can. (Use an OS 1:25000 map, a bike, a GPS, or, worst, a car)
  2. Prepare a course map
  3. Notify the police and follow any safety recommendations
  4. Only after 1, 2 &3 are you ready to contact an accredited measurer and make an appointment for an accurate measurement. The measurer will make a charge (see guidelines) and you should ask for an estimate.
  5. Supply the measurer with the following:
  6. On the agreed day meet the measurer and show him the course. It is usually best to accompany him on a bike. But a car may also be suitable. On busy roads the measurer may need someone behind him to 'protect' him from the traffic as he concentrates on an accurate measurement. Busy courses may need to be measured at a quiet time, e.g. early on Sunday morning. You may find it worthwhile to consult the Safety Code for Course Measurement so that you have an appreciation of the procedures the course measurer uses to make the measurement safe. The course measurer will seek your help to ensure his safety while riding, and he might not be able to complete the measurement at a single visit if he discovers hazrds which he has not planned for.
  7. After the measurement the measurer writes a report and sends copies to the race organiser and to the area measurement secretary, who issues the Certificate of Course Accuracy. Without a valid certificate or a renewal for subsequent races, any permit issued for a race advertising a specific distance would be invalid.