|Course Name||Run Bedford 10k|
|Race Name||Run Bedford 10k|
|Measured By||Tim Cook, Grade: 1|
|Measured On||13 May 2016|
|Terrain||Town route through the centre and immediate surrounds. I understand that there will be road closures in place for the race. Virtually flat throughout with only the slightest of inclines in parts|
|Surface||Town center and residential roads throughout, all on tarmac roads|
|Configuration||The course is a single loop with only left hand turns, there is a short out and back stage between 5 and 7km when runners will be on both sides of the road and the first km out is the last km back, to the finish|
|Section of Road||Use the left hand side of the road throughout the race. This is particularly important between 5km and 7km when there will be runners on both sides of the road as they go round a turn point just before 6k. No pavements.|
|Right Turns||The only time runners will take a right turn is at the approach to the turn point just before 6k. This will be clearly marked with marshals. They must remain on the left at all other times.|
|Comments||I was escorted by the Race Director throughout the course measure and he placed small yellow road paint at each of the km points|
|Grid Ref of Start||
OS GRID REF:
View in Streetmap: 00
Race Director: To renew this certificate for a new race date go to the renewal page.
Race (with web
|Run Bedford 10k||Beds||Steve Young||Galeforce Events||25 May 2016||5 Jun 2016|
|Run Bedford 10k||Beds||Steve Young||Run Bedford||16 Jun 2017||18 Jun 2017|
A report of this course measurement will have been sent by the measurer to the first race director shortly after the measurement date. This should be consulted to check the exact details of the certified course whenever the course is used . It is suggested that runners and officials requiring these details approach the race director in the first instance. A copy of this report has also been filed by the Course Measurement Secretary, and can be scanned and sent to runners, officials, or race directors on request .
Please report to any problems with using this webpage.